Change or rekey · Toronto
Smart Lock Installation
There are four copies of the front-door key floating around: one with the cleaner, one with a neighbour, one on a hook at your parents' place, and one you honestly cannot account for. You would rather hand out codes you can switch off.
Smart Lock Installation
In plain words
Our winters shape how a smart lock should be fitted. Cold drains batteries sooner, so the locksmith fits the maker's specified battery type, sets the low-battery alert to reach a checked phone, and shows how a fresh set goes in with gloves on. Meltwater that refreezes overnight can bind a bolt, so the strike is set to give the motor clearance. A storm door that traps summer heat, or a keypad facing driving snow, steers the choice of model and finish. Fitted this way, a smart lock is set up to perform through the cold months, even though batteries and materials still work harder in deep winter than in June.
How the visit goesThe rental turns over every few months and each time you drive across town to swap keys, then wonder whether copies were made. A lock with codes you can set and erase from your phone would end that cycle.
Toronto
How the visit goes
Taking stock of an existing electronic lock
When a keypad or app lock is already on the door, the assessment is about what it knows and who it answers to. The locksmith notes the model, checks whether the keypad, motor and battery contacts are healthy, and asks whether anyone holds the administrator account, the master code or the override key. A lock the previous owner still controls from an app is not yours yet, however new it looks. If the hardware is sound, a factory reset and a fresh enrolment may be all that is needed; if the motor labours or the keypad has worn digits, replacing it is the better path. Either way the door alignment gets the same scrutiny as for a new install.
Taking over a lock that is already there
When the smart lock came with the house or with a rented unit, the work is a controlled handover rather than a physical fit. The locksmith follows the model's own reset procedure, usually a button sequence inside the interior cover, which wipes codes, schedules and paired phones. The lock is then enrolled to an account you create, and every hub, voice assistant or automation once allowed to unlock it is found and removed through its own account or app, since resetting the lock does not always clear those outside connections. Batteries are swapped for a fresh specified set, firmware is updated, the override cylinder is rekeyed, and the bolt is tested through the door as if it were new.
A written record without your secrets in it
The visit closes with a plain note of what was done: the model fitted, the door corrections made, whether the strike was reinforced, which override cylinder was rekeyed and how many keys were cut, and which other doors were brought onto the same key. What the note never contains is a code, a password or a login; those exist only on your account and in your head. For a tenant, that record is the thing to share with a landlord so both sides know what hardware is on the door and that a working way in exists. For an owner, it simply goes in the folder with the house documents.
Smart Lock Installation
In the van
- Hand screwdrivers, Phillips and Torx
- Thick-door extension kit
- Wi-Fi bridge or home hub
- Reinforced box strike with long screws
- Smart deadbolt or smart lever set
What affects the quote
Same fees day, night or weekend
1Taking over an existing smart lock
Resetting, re-enrolling and cleaning the permissions on a lock that came with the property is a different job from fitting new hardware: less cutting, more account work, and it is quoted on its own footing.
2Network setup
Joining the lock to Wi-Fi, adding a bridge because the signal at the door is weak, or pairing with an existing hub is setup time and sometimes an extra device, and appears in the quote as such.
3Supplying the lock yourself
If you have already bought a lock, the quote covers fitting and setup only, with a note on whether the chosen model suits your door; if the locksmith supplies it, the hardware is listed alongside.
Smart Lock Installation: questions
I am a landlord. Are smart locks a good fit for my rental?
They suit turnover well: a departing tenant's code is deleted and a new one created without cutting keys or wondering about copies. Two things to plan for. The tenant in place must always have a working way in, which usually means their own code plus a key to the override cylinder, and any lock change on an occupied unit is done with the tenant's knowledge. Set the administrator account up under the property, not a departing employee, so control stays with you.
What happens when the batteries die?
The lock warns you well before that point, with a light or tone at the keypad and, on connected models, a message to your phone. If the warnings are missed, a keyed model's mechanical override still opens the door, while a key-free model instead has two small contacts on the outside where a nine-volt battery gives it enough power to accept a code. The locksmith shows you each route your model offers and where the spare batteries and the key should live.
What is the difference between a keypad lock, a Bluetooth lock and a Wi-Fi lock?
A keypad lock is operated at the door by code and needs no phone at all. A Bluetooth lock adds phone control when you are within a few metres, which covers most daily use and keeps the lock off the internet. A Wi-Fi lock, either built in or through a small bridge, lets you check and change the lock from anywhere and sends alerts, at the cost of more battery use and a dependence on the home network. Many models combine two of these.
Change or Rekey Locks
Smart Lock Installation near you
Every lock service we provide in Toronto starts with the same first step, which is looking at the door properly before deciding anything. The individual pages below explain what that look involves for each job, how the work is carried out, and what to expect from the hardware afterwards.