Skip to content
CentennialLock Experts · Port UnionOpen 24/7(289) 378-6209Request a visit
CentennialCentennialLOCK EXPERTS
Open metal case with brass pins and coiled springs sorted in small sections, with tweezers and a brass tool in front. — Port Union

Locksmith in Port Union, OntarioYour locksmithdown the road in Port Union

Being nearby changes how a job goes. It means a marked van in your driveway in Port Union, boots wiped at the door, a clear word about what we are about to do before we do it, and a locksmith who expects to see you again at the hardware store rather than never.

Locksmith services

Every kind of lock, one call

Doors in Port Union are opened, rekeyed, repaired, reinforced and replaced by the same small team, so you can pick one service today and add another later without explaining the house all over again. Start with the page that matches your door; the rest of the list will still be here.

High security

High Security Locks

Deadbolts differ in how far the bolt travels, how hard the bolt is, whether the cylinder guard spins free under a wrench and whether the housing shrugs off a hammer. High security deadbolts do well on all four, and we can show you the difference in hand.

Commercial

Commercial Locks

Door hardware in a business is part of how the day runs. If the staff door sticks, someone props it open.

Technician in black gloves holding a screwdriver at the knob lockset of an open dark door, with a tool bag nearby. — Port Union

Port Union

Sort your Port Union door with one call

Commercial customers in Port Union get a locksmith who understands traffic. A storefront door swings hundreds of times a day, and hardware chosen for a house will not last on it. We fit closers, lever sets and exit devices built for that use, adjust them so the door latches on its own, and schedule a service visit before anything wears out.

— Centennial Lock Experts

  • No surprises on the doorstepWhat we described on the phone is what we plan to do. If the door tells us something different when we see it, we stop and talk before going further.
  • Helping you choose wellHardware ranges from basic to heavy-duty and simple to electronic. We explain the differences that actually matter for your door and leave the choice with you.
  • Neat work, neatly finishedHoles drilled cleanly, hardware aligned, nothing crooked or forced. A lock should look like it belongs on the door, and we take the time to make sure it does.

Hours

  • HoursOpen 24/7
  • Nights and weekendsSame fees
  • In business21 years
  • VisitsOn-site assessment

Toronto, Ontario

Port Union information

Town
Port Union, Toronto, Ontario
In business
21 years
Hours
Open 24/7, same fees any hour
Visits
On-site assessment preferred

2021 census · what it means at the door

  • 58%Older homes

    About 58% of homes in Toronto were built in 1980 or earlier, according to the 2021 Census.

    In neighbourhoods of established homes, keys have often been copied many times over many owners. Rekeying every exterior door to one fresh key is the common first job, and it works on old cylinders just as well as on new ones.

  • 23%

    Single-detached houses make up about 23% of homes in Toronto (2021 Census).

    Where most homes are apartments or condos, storage lockers, bike rooms and parking gates carry their own locks. A locksmith can supply and key padlocks and cam locks for those spaces so one household ring covers everything it uses.

Source: Statistics Canada, Census Profile

Port Union

Calls like these

Ceramic dish holding keys on a wooden table beside a leafy vase, with a black door, deadbolt and knob behind. — Port Union

Break-In Damage Lock Repair

Police have come and gone, the occurrence number is on a sticky note, and you are standing in a cold hallway looking at a splintered frame, wondering how the house gets locked before everyone tries to sleep.

Break-In Damage Lock Repair

You asked, we answered

(289) 378-6209

Should I upgrade to a stronger deadbolt while you are here?

It is the natural moment, because the door is already open for repair. A deadbolt with a full one-inch throw, a hardened insert against sawing and a low-profile face that resists a wrench grip, graded to a recognised durability standard, takes little extra effort to fit now compared with a return visit. Pair it with the reinforced strike and long screws and the door becomes hard to attack from any side. The choice is yours; the locksmith shows the options and lets you decide.

Can you match the new lock to my other door hardware?

Yes. Manufacturers make deadbolts, handlesets, knobs and levers in matching finishes and styles, so a replacement deadbolt can sit above your existing handle without looking like an afterthought. Bring or photograph the hardware you want to match, including the interior side, and note whether it is a warm brass, a satin nickel, an oil-rubbed bronze or a matte black. Where an exact match is not made, the locksmith suggests the closest family.

What happens when the batteries die?

The lock warns you well before that point, with a light or tone at the keypad and, on connected models, a message to your phone. If the warnings are missed, a keyed model's mechanical override still opens the door, while a key-free model instead has two small contacts on the outside where a nine-volt battery gives it enough power to accept a code. The locksmith shows you each route your model offers and where the spare batteries and the key should live.

Will my door look different afterwards?

Barely. A high security cylinder sits in the same place as the old one and is usually distinguished only by a different keyway shape and sometimes a hardened collar. A graded deadbolt is a standard-looking deadbolt in your chosen finish. The reinforced strike is longer than the plate it replaces and the wrap-around reinforcer, if used, shows as a neat metal band on the door edge. The difference is felt when you lock up, not seen from the street.

How many keys should we have cut?

Count the people who need each group, add one spare per group for the safe, and stop there. Extra keys cut 'just in case' are the ones that end up unaccounted for. Because the keys are cut to code from the pinning records, more can be produced later to the same standard, so there is no need to stockpile on the day. Restricted keys are ordered by the named signatories when needed.

On-site assessment preferred

Request a visit

Talk to us about access for your staff. Ask about a spare key before you need one.

Centennial Lock Experts

Locksmith · Port Union

Open 24/7

(289) 378-6209

21 years in business

Open 24/7 · call(289) 378-6209Request a visit